Jansen Egeplast SLA® Barrier Pipe
The non-permeable pipe system
The non-permeable pipe system for installation in contaminated ground and ground at risk of contamination.
The Jansen Egeplast SLA® Barrier Pipe system reliably prevents permeation of noxious substances. The metallic permeation barrier provides permanent protection for the environment and for fluids sensitive to contamination. Furthermore, the electrical properties make it possible to locate the pipe line and to examine it for damage after installation.
Construction
- Protective sleeve pipe
- Solid wall pipe made of PE 100 RC
- Barrier layer consisting of
- Aluminium (KIWA-certified), additional protection layer made of PE plus
Dimension
dn 25 - 1600 mm
Pressure grades
- PN10, PN 16
- PN 25 (on request)
Application
- Water
- Gas
- Wastewater
- Industry
Installation method
- Open trench
- Relining
- Hydraulic drilling
- Berstlining
- Ploughing method
- Milling method
Special feature
Permeation protection, test of integrity after trenchless installation, permanent location detection facility
PAS 1075 type
Type 3
Embedding when installed in the ground
Gravel or sand up to 32 mm
Jansen Egeplast SLA® Barrier Pipe
in lengths of 12 m, smooth ends
| Nominal pressure | Series / SDR | Dimensions dn |
| PN 10 | 8 / 17 | 25 - 1600 mm |
| PN 16 | 5 / 11 | 25 - 1600 mm |
Jansen Egeplast SLA® Barrier Pipe
in coils of 100 m, smooth ends
| Nominal pressure | Series / SDR | Dimensions dn |
| PN 10 | 5 / 11 | 25 - 160 mm |
| PN 16 | 5 / 11 | 25 - 140 mm |
References
