Jansen Egeplast 3L safety pipe system®
The permanently monitored system
Pipe system with permanent monitoring and precise detection of leakages, for open and closed installation methods.
The Jansen Egeplast 3L safety pipe system offers 100% leakage monitoring where required for ground and water protection. A monitoring unit attached to the pipe will trigger an alarm when detecting even very minor pipe damage. Messages are sent directly to the control station or to a smartphone. It can automatically deactivate any connected pump systems and thereby reliably prevent disaster at an early stage.
Construction
- Protective sleeve pipe
- Solid wall pipe made of PE 100 RC
- electrically conductive aluminium detection layer
- additional protection layer made of PE plus
Dimensions
dn 25 to 630 mm
Pressure grades
- PN 10, PN 16
- PN 25 (on request)
Application
- Water
- Gas
- Wastewater
- Industry
Installation method
- Open trench
- Relining
- Hydraulic drilling
- Berstlining
- Ploughing method
- Milling method
Special feature
Permanent monitoring for leaks and location of any damage, puncture protection, integrity test after trenchless installation, permanent defect detection facility
PAS 1075 Typ
Type 3
Embedding when installed in the ground
Gravel or sand up to 32 mm
Jansen Egeplast 3L safety pipe system®
in lengths of 12 m, smooth ends
| Nominal pressure | Nominal pressure Series / SDR Dimensions dn | Dimensions dn |
| PN 10 | 8 / 17 | 25 to 630 mm |
| PN 16 | 5 / 11 | 25 to 630 mm |
Jansen Egeplast 3L safety pipe system®
in coils of 100 m, smooth ends
| Nominal pressure | Series / SDR | Dimensions dn |
| PN 10 | 8 / 17 | 25 to 160 mm |
| PN 16 | 5 / 11 | 25 to 160 mm |
References
