rating Capacity per metre pipe 32 x 2.9 mm PN 16 0.517 l 40 x 3.7 mm PN 16 0.802 l 40 x 4.1 mm PN 18 0.762 l 40 x 4.5 mm PN 20 0.725 l 50 x 4.6 mm PN 16 1.255 l 50 x 5.6 mm PN 20 1.135 l 50 x 6.9 mm PN 25 [...] Anti-freeze is expensive; with the JANSEN shark ground source heat systems, filling is also around 4 % less expensive than with conventional smooth pipes. Ground source heat loops With JANSEN shark technology
process. This includes the test certificates in accordance with EN 10204-3.1. Materials polyethylene PE 100 RC Construction 3-layer Colour Blue Applications Drinking water supply Gas supply Trenchless [...] transfer (not for gas) Nominal pressure PN 10, S 8 / SDR 17 PN 16, S 5 / SDR 11 On request PN 25, S 3,2 / SDR 7,4 On request PN 40, S 2 / SDR 5 Connection techniques Butt weld (heating element butt welding)
Arb. Nr. Example: Jansen nero under licence of Wavin PE80, ø 125 x 4.9, SSIV/VSA, JO 14.13 081547, 1983 Physical properties Melt index 0,3 - 0,89 g/10 min Coefficient of linear expansion 0,2 mm/m - K UV-resistant [...] UV-resistant thanks to soot share from 2 - 2,5 % Fire behaviour Fire code SI VKF Iv/3 B2 Ground pipes The applications of the JANSEN nero drainage pipe system for buried wastewater pipes, such as dimensions
quantity 3l/m rather than 2l/m) RE1200 water tightness class 2 kN/m 2 wind load resistance class AE750 air permeability class U f > 1.49 W/m 2 K heat transfer coefficient Clamp connection AbZ Z-14.4-465 M [...] Mullion-transom connection AbZ Z-14.4-467 Swiss fire protection approvals
insulation up to 45 dB Air permeability Class 4 Tightness against heavy rain 8A Wind load resistance Class C3/B3A3 Durability Class 7 Impact resistance Class 4 Operating forces Class 2 CE label yes BIM model [...] flexibility – maximum design freedom single- and double-leaf doors that open inwards and outwards very slim 3D screw-on hinges made from stainless steel various materials designer glazing beads in wet and dry glazing [...] a few handles. By eccentrically arranging the openings, this can compensate for an offset of up to 3 mm. This also ensure that readjusting doors is easier: the same striking plate can be turned 180° and
view out. Test certificates Q-Signet FFF Air permeability class 4 Tightness against heavy rain 9A Wind resistance up to wind load class C3 Sound insulation Rw 37 dB
Janisol 2 EI30 have been expanded with the installation depth 70 mm. In this way transparent Janisol C4 EI60 fire-resistant partitions - in the extreme case even EI90 fire-resistant partitions- can be combined [...] glazed panel sheet metal clad doors Door height up to 2.5 m with single-latch lock Door height up to 3.0 m with single-latch lock and bi-metal lug or single-latch lock with top retracting bolt or with multipoint
ordering and processing documentation for the systems: Jansen-Economy 50/60 (E) Janisol 2 (EI) Janisol C4 (EI) VISS fire facades (E / EI) Construction use of fire protection glazing Fittings requirements Practical [...] – 17:00 Day 2: 08:30 – 16:30 Licence fee CHF 600.- per person CHF 900.- for 2 people CHF 1200.- for 3 people CHF 250.- for each additional person Please note Jansen AG, Customer Information Centre, Oberriet
m 2 pipes at a depth of 1.5 m 4 pipes at a depth of up to 2 m Special versions possible Approvals / certifications SKZ Guideline HR 3.44 SKZ quality seal A698 EN 10204-3.1 Material as per PAS 1075 Associated [...] Recommended minimum distances From structures 2 metres From supply lines 1 metre Between the trenches 3 metres From the site boundary 1-2 metres Further notes Local regulations and aspects are to be taken
this lower level must not be at risk from falling shards of glass. DIN 18008-4 Barrier glazing is described in DIN 18008-4. Both the mounting and configuration of the panes is crucial here. As such, Jansen [...] mechanical properties. The window systems Janisol HI and Arte 2.0 are placed in the highest class (class 4) in terms of usability and Janisol HI is also in the highest class (class 2) in terms of operating forces [...] in DIN EN 1192. In this regard, steel-frame doors by Jansen have achieved the highest class (class 4) thanks solely to their material properties and without any additional measures being required. Long-term
Nominal pressure Series / SDR Dimensions dn PN 10 8 / 10 75 - 400 mm PN 16 5 / 11 32 - 400 mm PN 25 3.2 / 7.4 32 -400 mm Extra-large (XXL) pipes up to 1600 mm on request JANSEN pressure pipes of PE 100 RC in
Oberriet, Switzerland Tel.: +41 71 763 93 70 E-Mail: service@ remove-this. jansen.com www.jansen.com 3 Access 3.1 Registration Users must register in order to be able to use the "Jansen Docu Center". Users may [...] validity of these Terms and Conditions of Use for the "Jansen Docu Center", as amended from time to time. 3.3 Blocking of access Jansen shall be entitled to revoke the access credentials at any time by blocking [...] the "Jansen Docu Center" for an extended period of time, as a rule for 6 months. 4 Intellectual property and usage rights 4.1 Intellectual property All intellectual property rights over the content retrievable
at the bottom of a top-hung window. 3. Vertical pivot window With a pivot window, the window only rotates on its own vertically mounted axis of rotation when opened. 4. Projected top-hung windows Projected [...] these doors both inwards and outwards. They are particularly suitable for high-frequency passageways. 3. Pivot doors Pivot doors differ from the classic side door hinges, replacing the standard fastenings [...] centrally or off-centre and can be pivoted. This means that even very large door leaves can be used. 4. Sliding doors For sliding doors , there are various more detailed designations depending on the opening
design Small appliances Excellently suited to refurbishments Easy integration Certification SKZ-HR 3.44, SKZ A698 Material PE 100 RC Variants Outer pipe generally welded to special base in the factory; [...] variant pre-assembled Smooth pipe 32 mm Minimum bending radius 0.45 m @ 20° C Pressure rating PN 7.4 Safety factor 1.25 Burst pressure 24.1 bar @ 20° C Buckling pressure 6 bar @ 20° C Volume per probe
100 Nm, class 2 = 30 Nm), while for exterior doors it is DIN EN 12217 (class 2 = 50 Nm, class 3 = 25 Nm, class 4 = 10 Nm). For all building elements, the higher the operating class, the easier it is to operate
General information 2. Data processing for the provision of services and contract processing 3. Contacting Jansen 4. Purposes of data processing 5. Duration of storage 6. Your privacy rights 7. Forwarding [...] writing, enclosing an official identification document with the keyword "data protection". 4. Purposes of data processing 4.1. General data processing The usage data collected, stored and processed by Jansen [...] receive data from Jansen for advertising purposes and may also use this data for marketing purposes. 4.3. Data analysis Jansen uses data analysis to collect analytical and statistical information. This data
CEPHELER
VISS RC4 hırsızlığa karşı direnç
ve kaçış direnci
Maksimum bina koruması
Lüks mülklerin korunması için Jansen hırsızlığa karşı dirençli
RC3 sistem çözümünü geliştirerek VISS RC4 şeklinde sunmuştur [...] onaylanmış olan
VISS RC3 sistem çözümü, arttırılmış güvenlik gereksinimlerini
karşılayan VISS RC4 sistemine dönüşür. Görsel olarak standart
VISS cephesine özdeş VISS RC4 yapısı görüntü itibari ile [...] RS
• Janisol 2 EI30
• Janisol 2 EI30
Yangına dayanıklı kayar kapılar
• Janisol C4 EI60/EI30
• Janisol C4 EI60 ve EI90
7STEEL SYSTEMS PROFIL SISTEMLERI
Château de Rentilly, Bussy-Saint-Martin/Fransa
wind zones with different base wind speeds (wind zone 1: base wind speed 22.5 m/s, 2: 25.0 m/s, 3: 27.5 m/s, 4: 30.0 m/s). However, wind load is also a factor that needs to be considered in the case of high-rise [...] insulating door and window systems for external applications have been put in the best class – class 4. Build safely and in line with standards with steel profile systems At our test centre in Oberriet,
situations The assessment of glass building elements that serve as barriers is governed by DIN 18008 Part 4, which is concerned with the impact resistance of the laminated safety glass LSG and with the load-bearing [...] – for public buildings in Part 1, for residential buildings in Part 2 and for public spaces in Part 3. DIN 18040-2 makes a distinction between public areas and private residential areas. And as in DIN 18040-1 [...] points a to e; class d, for example, is based on a temperature differential of 40°C. Doors in class 3 (d), however, suffer a maximum distortion in length and width of four millimetres, even under these
products of Jansen AG, or in connection with auxiliary materials, such as belts, ropes, binding wire, etc. 3. Pricing, Scope of Delivery All prices are in Swiss francs (CHF) excluding value-added tax (VAT), the [...] over deliveries of goods of up to 10%. Price changes and rounding differences may be made at any time. 4. Returns, Credits Returns and resulting credits are only possible upon prior agreement and for current
Mixed function Jansen steel facade with aluminum Schüco insert elements From this version on, you have the option of using the mixing function. You can put in a VISS 50 or VISS 60 facade, a Schüco win
which can be downloaded and used. STEP Export Since 3D programs are widely used nowadays, elements can now be exported as STEP files and loaded into a 3D CAD program that can read the STEP format. This option [...] Options up to RC2 are available for a double-vent window and for a normal tilt and turn window up to RC3.
life pieces with several side. 3D polygon elements for fixed fields / windows and doors If you create a new position you get now a new system template, which you can enter the 3D-Elements for all fix fields [...] consists of a corner glass construction. You can specify an infinite number of areas and angles in these 3D position constructions. You can also change the corner glass construction by hand to Jansen system
